By integrating industrial robots, vision systems, precision temperature control equipment, and intelligent control systems, the fully automated production process for coating metal/plastic workpieces with elastomeric materials such as rubber and silicone is achieved, replacing traditional manual operations and enhancing product consistency and production efficiency.

• Operating 24 hours continuously, the single-line production capacity has increased by 3 to 5 times.
• The sealed rubber trough and the clean unit prevent dust from contaminating the rubber surface.
• A single line only requires one person for monitoring, replacing the original 5 to 8 skilled workers.
• Completely isolate the organic solvent/high-temperature areas to eliminate occupational health hazards.
• Offline programming rehearsal package ensures the path is pre-determined, avoiding on-site trial and error.
• Support seamless transition between small-batch customization and large-scale orders.
• The trajectory reproducibility of the robotic arm far exceeds that of manual operations, eliminating uneven thickness and edge overflow of the adhesive.
• Applicable to various types of workpieces such as cylinders, polyhedrons, and complex curved surfaces.
• Real-time upload of production volume, yield rate and equipment status, enabling digital management.
• Robotic arm synchronously completes the bagging of multiple workpieces during the curing waiting period.

• After the robot starts working, personnel should leave the working area to prevent accidents.
• If the robot gives an alarm, resolve the issue before reconnecting the servo power supply.
• Regularly clean dust from the control cabinet and the robot surface.
• Regularly back up the data program of the robot to prevent loss.
• Replace the main body battery annually and control cabinet battery every two years.
• Regularly check the motor reducer sound and tightness of screws/nuts.
• Regularly check voltage, current, and ground wire connections.
• Regularly check if the air pressure reaches normal levels.